Instruction Manual Washing Machine Model number: RH1042 Please read these instructions carefully and keep them for future
Using your machine Open the door of your machine. Place your laundry in your machine. Note: Maximum loading capacity may vary based on the lau
Control Panel Detergent Drawer 1 Drawer 2 Programme Knob 3 Programme ready light 4 Programme end light 5 Cold w
Selecting a Programme Select the required washing programme by rotating the programme knob in either direction (clockwise or anti-clockwi
Using your machine Before Use Plug your machine in. Turn on the tap connected to the machine. Open the machine door. Place your laundry in y
RINSING When you need an additional rinsing to be done to your clothes after the washing process, you can use this programme for all kinds of cloth
Child Lock Child lock is used in order to protect the washing cycle from the effects of unwanted button activations during the cycle. The Child loc
Maintenance and Cleaning When cleaning your machine, ensure that the machine is unplugged and the water supply is closed off. Water Inlet Filters
Cleaning the pump A filter system is available which avoids threads from your laundry and tiny materials from entering into the pump during th
Cleaning the detergent drawer Your detergent may deposit residue in the detergent drawer over time. To clean the residue formed, disassemble the de
Body Clean the outer body of your machine with warm water and a non-inflammable cleaning agent that will not abrade the body of your m
Contents Before Use ... 3 Safety Warnin
FAULT POSSIBLE CAUSE REMOVING METHODS Your machine does not start. It is not plugged in. Plug machine in. Fuse blown. Replace the fuse. Electricit
Energy Efficiency Energy and water consumption may vary based on water pressure, water hardness, water temperature, ambient temperature, laundr
For manufacturer’s warranty information please call 0845 208 8750 Opening times: Monday - Friday 9am until 5pm Saturday: 9am – 1pm Revision
Before Use Safety Warnings You should remove the transportation bolts from your machine before the first usage. Faults occurring in ma
Recommendations Ensure you run the machine empty on a full cycle at 90°C with detergent before using the machine properly for the first time
Installation Removing transportation bolts Transportation bolts, which are located at the back of the machine, must be removed before using or runni
Leveling the machine Your machine should be installed on a hard surface – do not install onto a carpet. For your machine to work quietly and
Water inlet connection Only a qualified engineer should install this machine Your machine has a single water (cold) inlet. To prevent leakage
Technical specifications Operating voltage / frequency (V/Hz) (220-240) V ~/50Hz Total current (A) 10 Water pressure (Mpa) Ma
Preparing your laundry Separate your clothes according to their type (cotton, synthetic, sensitive, woolen, etc), washing temperature, dirtiness
Comments to this Manuals